Fuel injection advantage.......
There are a lot of people who would disagree with that. Carbs are also still dominating at the track also.
On top of that, install one of the performance (non-EPA approved pumper carbs) such as the Mikuni HSR-42 I'm running on my 95" WideGlide and the throttle response is instant and immediate.
I have a EFI FatBoy that has a Screamin' Eagle Race Tuner and has been dyno tuned for maximum performance. Even so, the throttle response is nowhere need that of my bike with the Mikuni HSR-42. That's just a weakness of any EFI system.
I own both EFI and Carb'd Harleys, and for ease of modification and top end performance a carb'd bike will always lead the pack.
Trending Topics
have a fuel controller on it and have tuned it to run rich. no stalling, no popping, just a perfect ride all the time. cant beat that imo.
The Best of Harley-Davidson for Lifelong Riders
Unlike the CV carb's, the choke circuit on the HSR is self adjusting, almost like having an 'automatic' choke.
You pull the 'choke ****' out, fire up the bike, and it provides the correct mixture so there are no pops, back firing, hesitation... When the bike starts to warm the choke adjusts itself, unlike the CV choke circuit/**** that has to manually be pushed in and out to obtain the correct mixture.
After the engine warms up the choke circuit/**** closes itself down to what would be considered a 'fast idle'. At that point you reach down, push in the **** the remaining 1/16th inch or so, and the choke circuit is completely closed..
Works almost as easy as having EFI, but you also have the benefit of the easy tuning, and instant throttle response (because of the adjustable accelerator pump).
The HSR Mikuni are somewhat more expensive than your stock CV's, but in this case you get what you pay for, and there isn't a better carb for high performance applications. In fact my mechanic friend has told me that to get the same flow rate of a HSR 42 you would need to run a CV 46.
But then again, EFI is great for someone that just wants to hop on their bike and ride, maybe do the normal 'Stage 1' type downloads, but isn't interested in obtaining every available horsepower the engine can provide.
Last edited by OldFenderGuy; Nov 5, 2009 at 10:37 AM.
Just tap the starter and let it run for a minute (just enough time to buckle the helmet and put gloves on), pull off and ride gently until the oil gets warm too -- my carbed bike wouldn't let me do that.
Plugs don't foul, EFI adjusts for weather and altitude. I changed my plugs at the beginning of the season, but only because the outside was starting to rust.
Down side is when you change stock air box and/or pipes. Then EFI hits you with a big cash penalty to re-map. Like mifnight said above, a re-jet is cheaper than EFI at that point.
Last edited by mbwannabe1; Nov 5, 2009 at 11:54 AM.


