When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I consider myself very lucky this video was shot on Friday with my wife on the back, I shutter when I think what could have happened. Pictures was taken with a pocket camera that I carry when riding, also used to shoot this video.
thanks for the heads up Eric. I have heard what sounds like a bearing noise in the front end of mine sometimes in corners. It also seems like my calipers aren't releasing all the way as I can here and feel my brakes rub when I cleaned my white walls on the lift. May have to stop by the dealer, I only have about 3500 miles on mine.
Please don't flame me for the miles as there would be more if it was up to me.
I was told it was normal for the brakes but when they replaced my bearings they did the brakes also. All under warranty. $10 for their beer fund and down the road.
My son`s 2007 Street Guide rear went at 17,000 miles ,I though that was early also. My 2002 FLHTC only has 18,000 miles and so far no problem with mine. I have a bad back so I don`t get to ran that much,plus my job has me working most weekends when everyone else I know is riding. Save Riding ,Mike
I was on the interstate last Sat when suddenly the front end starting vibrating a little, shimmying from side to side, not dramatic, just suddenly different. I pulled over thinking I was getting a flat or something. Looked over both tires real well and saw nothing. I rode a little slower another 25 miles or so home. The next day I was going to jack it up and check the neck bearing play or see if I had play in the swingarm or wheels. Before I put the jack under the bike, I saw that my front right bearing looked pretty much like yours. 09 Ultra with 20,000 miles. New tires in Jan at 16,500 and the bearings all seemed fine when I checked them then. I'm not sure what's going on with these but I've never had a wheel bearing go out on any of my many bikes and Harleys in the past. Anyone know if the 09's use different bearings from earlier Ultra's
Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.