braided fuel line with disconnect

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2009 | 10:40 AM

#11

BoomerBob

Elite HDF Member

Joined: Apr 2009

Posts: 3,928

Likes: 1

From: Desert S. West

Here's a SS line with disconnect already made up. I would contact them about the ends working on your bike and verify the size.

http://cgi.ebay.com/ebaymotors/EZ-FL...Q5fAccessories

Nov 4, 2009 | 10:46 AM

#12

8541hog

Ultimate HDF Member

Joined: May 2008

Posts: 6,642

Likes: 48

From: Ogden, UT

That looks like it has the same fittings that HD uses on their SS crossover, if it is I would NOT use it, those things are a pain and leak if not exactly perfectly installed.

Nov 4, 2009 | 12:31 PM

#13

sniper77

Outstanding HDF Member

Joined: Sep 2007

Posts: 3,352

Likes: 4

From: Augusta, GA

...not to mention at 18 1/4" in length they are at least 10" too long.

Nov 4, 2009 | 07:06 PM

#14

cactusred

Thread Starter

Road Master

Joined: Aug 2008

Posts: 1,027

Likes: 163

From: Grapevine Texas

Quote:

Originally Posted by BoomerBob

Here's a SS line with disconnect already made up. I would contact them about the ends working on your bike and verify the size.

http://cgi.ebay.com/ebaymotors/EZ-FL...Q5fAccessories

That one I actually saw on ebay, and thought it looked good but it's 18 1/4 inches long and I measured the stock rubber hose, it's 6 inches tops. I guess I could wrap a loop in it and hang a wind chime off it, lol.

Thanks for the pics and ideas

Nov 4, 2009 | 07:20 PM

#15

sata6

Cruiser

Joined: Mar 2008

Posts: 103

Likes: 0

From: Trail, British Columbia

check the jp catalog

Nov 4, 2009 | 09:45 PM

#16

BoomerBob

Elite HDF Member

Joined: Apr 2009

Posts: 3,928

Likes: 1

From: Desert S. West

Quote:

Originally Posted by sniper77

...not to mention at 18 1/4" in length they are at least 10" too long.

I missed that. I'm wondering if it's a misprint. The coupling is about 2.5" and the hose looks to be about 3" each. I bet that's supposed to read 8 1/4".

I'm going to ask the seller.

Nov 7, 2009 | 10:03 AM

#17

sniper77

Outstanding HDF Member

Joined: Sep 2007

Posts: 3,352

Likes: 4

From: Augusta, GA

Quote:

Originally Posted by BoomerBob

I missed that. I'm wondering if it's a misprint. The coupling is about 2.5" and the hose looks to be about 3" each. I bet that's supposed to read 8 1/4".

I'm going to ask the seller.

Even @ 8 1/4" it will be too long on the Dyna tanks to fit under the frame and not contact the engine or downtubes.
That is a problem with some items made for softails or FLs, they simply don't work on the FXD.