Andrews 54H cam results

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2009 | 05:01 PM

#11

rdondes

Road Warrior

Joined: Jul 2007

Posts: 1,707

Likes: 4

From: Newtown, PA

Excellent write-up Lama.

Nov 8, 2009 | 03:21 PM

#12

motolocopat

Road Captain

Joined: Mar 2009

Posts: 689

Likes: 6

From: Glen Rose TX

Please post up the tune and dyno info when you get it.

Apr 8, 2013 | 03:34 PM

#13

WG2011

Outstanding HDF Member

Joined: Jun 2011

Posts: 3,036

Likes: 19

From: Savage, MN

Over all how is the 54h in the dyna I am thinking of getting this cam from a buddy for a great deal but just making sure its not a mistake in a dyna? Thanks

Apr 8, 2013 | 03:48 PM

#14

dirtdobber

Elite HDF Member

Joined: Jul 2007

Posts: 4,749

Likes: 16

From: sand mountain Alabama

Andrews 54H cam is not really a high lift cam so to say. The lift is only .555 but to some cam's it is.
According to Andrews they recommend 10.1 compression.
I have looked at many dyno sheets using this cam and of course there are a lot of configurations. The bottom line is you can gain a lot from some head work. Every dyno sheet I looked at with at or over 100hp/100tq. had head work. There were a couple that got close to the 100/100 without head work but most was below it.
From the dyno sheets it looks like a very good Torque cam.