DIY Cheap Mods
Advanced
Joined: Jan 2009
Posts: 90
Likes: 0
From: Tunas, Missouri
Fender bib
Here it is, What do you think?
The license plate looks really bad with the fender clean so I built a bracket and moved it below the turn signals tonight. I'll put pics up of that later.
The license plate looks really bad with the fender clean so I built a bracket and moved it below the turn signals tonight. I'll put pics up of that later.
Road Master
Joined: Feb 2008
Posts: 1,012
Likes: 1
From: SoCal
I trimmed some of the fat off of my chrome lower belt guard to show off more of the chrome rear pulley.
Total cost...well if you have the right tools already in the shed...free! Just do a little tracing, get to handy dandy dremel out, and cut away carefully.
This isn't the best picture of the shaved guard, but if you look closely you can see the difference.
I got this idea from a friend...I can take absolutely no credit for this mod, other than being a copy cat
.
Total cost...well if you have the right tools already in the shed...free! Just do a little tracing, get to handy dandy dremel out, and cut away carefully.
This isn't the best picture of the shaved guard, but if you look closely you can see the difference.
I got this idea from a friend...I can take absolutely no credit for this mod, other than being a copy cat
.
Tourer
Joined: Apr 2008
Posts: 341
Likes: 0
From: Ft Leonard Wood
I trimmed some of the fat off of my chrome lower belt guard to show off more of the chrome rear pulley.
Total cost...well if you have the right tools already in the shed...free! Just do a little tracing, get to handy dandy dremel out, and cut away carefully.
This isn't the best picture of the shaved guard, but if you look closely you can see the difference.
I got this idea from a friend...I can take absolutely no credit for this mod, other than being a copy cat.
Total cost...well if you have the right tools already in the shed...free! Just do a little tracing, get to handy dandy dremel out, and cut away carefully.
This isn't the best picture of the shaved guard, but if you look closely you can see the difference.
I got this idea from a friend...I can take absolutely no credit for this mod, other than being a copy cat
.
Advanced
Joined: Jul 2006
Posts: 71
Likes: 0
From: Florida
I didn't read through all of the ideas yet? However I got an idea one day fooling around with the car. I had some left over colored wire loom and put the size that fit on the bike's spark plug wires, and that turned out rather nice looking I thought?
That inspried me to use some of the left over chrome looking loom on other areas of the bike. That works pretty well in some places but doesn't in other areas. If its in an area where it doesn't rub or catch a lot of wind then the chrome looking loom will work. However, given the nature of how the chrome looking loom is plated it's not like the colored loom and will chaff badly in areas such as brake lines and cables. I don't recommend it in those areas better to leave them as they are...
If you look at my garage you might be able to see what I did on the bike? Like I said very cheap mod almost free to me, as I already had the loom left over from the TA.
That inspried me to use some of the left over chrome looking loom on other areas of the bike. That works pretty well in some places but doesn't in other areas. If its in an area where it doesn't rub or catch a lot of wind then the chrome looking loom will work. However, given the nature of how the chrome looking loom is plated it's not like the colored loom and will chaff badly in areas such as brake lines and cables. I don't recommend it in those areas better to leave them as they are...
If you look at my garage you might be able to see what I did on the bike? Like I said very cheap mod almost free to me, as I already had the loom left over from the TA.
Last edited by *JC*; Nov 9, 2009 at 08:17 PM.
Road Master
Joined: May 2009
Posts: 983
Likes: 4
From: Fredericksburg, Va
Took some of the advice from this thread and did up a nice set of baffles, lollipop style. Cutt down my V&H BR baffles to 4 1/2" then spent about $2 at Lowes on 2 thumbscrews 1/4" and 4 nuts. Drilled some holes through the baffles and put the thumbscrews inside out securing them in with the 1/4" nuts. It sounds great and Im sure did some justice with back pressure.
Thread Starter
|
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 35
From: Rochester, NY
There not, so no appologies are needed, besides I like big pics, its easier for my old eye's to see.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Road Master
Joined: May 2009
Posts: 983
Likes: 4
From: Fredericksburg, Va
Bag mount made from old computer case, spacers (1x 1" and 2x 1.5"), 3x 3/8" x 2" and 8x 3/16" binding posts. Total cost approximately 20.00 I cut the cpu case around the 90 degree angle (on eof the sides) and drilled holes...3 x 3/8" for the mounting bolts. These three bolts go through the metal plate and go into the side of the frame of the softail just below the stock seat mounting holes. I bolted the bag to the metal plate using 8 3/16" binding posts. Used the spacers to get distance away from the paint and chrome. Only problem is that I might end up scraping away the bag but so far no problem. I like it better than the swingarm bag...IMO.
Side View
Close up of side view (bad pics..I know)
TOP view of spacers...top spacer is 1"...rest are 1.5"
Side View
Close up of side view (bad pics..I know)
TOP view of spacers...top spacer is 1"...rest are 1.5"