When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is everbodys opinion on the oil line size? I took all of the old lines off and was getting ready to replace them with 5/16 hose. Some guy out and says "never run any oil line smaller than 3/8 on any Harley". So's I gotta ask you characters in the know. Oh, 92' Dyna by the way.
Yeah, I was just hoping 5/16 would work since I had about 10 feet in a drawer. I got me some 300# rated 3/8 line and I am going to use that. This stuff don't kink at the bends. Now I gotta get some bigger hose clamps.
I did mine with Russell stainless braided 6AN (3/8") lines. A biatch to work with, but some tough stuff.
I know this is old, but just wanted to say...
I bought that same line, and tried to get it in there, work properly, and have a nice seal, but gave up after wrestling it for some time. Only way I thought it would work was to strip off the stainless for the clamp area, and then maybe wrap some grey duct tape around it there to make it look pretty.
Fought with it and then just said in the end, performance comes before beauty! So now I have some stainless braided hanging around collecting dust.
Told you it was a biatch to work with. What I would do back then is cut it with a wizz wheel, clean it out, clamp it in the vice, jam an expander tool I made from stuff laying around into it to get it to loosen up a tad, then fit it to the original fittings and use a screw compression clamp. Now, I cut that stuff by first wrapping it in black tape and then using a cable cutting tool.
Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.