Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

Excessive Throttle Play ... How to fix??

Thread Tools
 
Search this Thread
 
Old Oct 26, 2009 | 10:54 AM
  #1  
cpiad's Avatar
cpiad
Thread Starter
|
Account Closed
Joined: Oct 2009
Posts: 682
Likes: 1
From: In the World
Default Excessive Throttle Play ... How to fix??

Can someone share a Dick-and-Jane procedure for taking up play in the throttle on a 2010 883L? I've got a 2010 883L ... and the dealer pretty much handed me the keys and walked away ... I drove away. After a couple of days riding ... noticed that there is an annoying amount of throttle play .. about 3/8 to 1/2 inch linear rotation before throttle engages. I don't like play of any kind ...

If you can help a dumbshit like me take the play, I'd appreciate it. I'd rather not go back to the dealer except for the 1st 1000k maintenance and check-out. Thanks much for sharing your expertise.
 
Reply
Old Oct 26, 2009 | 02:26 PM
  #2  
NightsterAl's Avatar
NightsterAl
Cruiser
Joined: Oct 2008
Posts: 146
Likes: 0
From: St. Louis, MO
Default

I'm guessing your throttle assembly is like my 07 sporty's.
under your throttle side controls you should see your cables going into the control assembly. On those cables there are two rubber covers. The front one is the idle cable and the other is your throttle cable (if I remember correctly).
Pull those covers down and you should see adjustment screws. I would try tightening your throttle side up (which should be the cable closer to the rear of the motorcycle).
 
Reply
Old Oct 26, 2009 | 03:20 PM
  #3  
cHarley's Avatar
cHarley
Club Member
Joined: Feb 2007
Posts: 16,320
Likes: 306
From: Boynton Beach, FloriDuh
Default

+1 - But you need to set the pull open throttle cable first and then just take up the slack in the idle cable.

I'm not going to be a ***** here, but this is pretty easy stuff if you'll spend $60 on a Service Manual. It will pay for itself many times over.
 
Reply
Old Oct 26, 2009 | 05:58 PM
  #4  
cpiad's Avatar
cpiad
Thread Starter
|
Account Closed
Joined: Oct 2009
Posts: 682
Likes: 1
From: In the World
Default

Originally Posted by cHarley
+1 - But you need to set the pull open throttle cable first and then just take up the slack in the idle cable.

I'm not going to be a ***** here, but this is pretty easy stuff if you'll spend $60 on a Service Manual. It will pay for itself many times over.
Thanks ... I'm not being a ***** either.. or a lazy *** ...so, first, thanks for offering your help. Now my sermon ... Some of us are not mechanically inclined ... and some of us are ...and some of us are good at other things .. in my case its math ... I can map fuel curves like no body's business and work non linear energy transfer functions that most people could never begin to understand how to unravel .. but I don't have a clue as to what a "pull open cable" is and I sure as hell don't know what an "idle cable" is ... I have manuals for my Mercedes and the Miata and 60% of the time its confounding as hell to me. I do the best I can ... with what I have .. I'm 56 years old ... and I am now forgetting more things I used to know than I could ever replace with new knowledge and talents ...

I was just asking for some help from more experienced folks ... I won't ask again so I don't have to get a lesson I don't need ...Hell .. I'll just take it the Harley dealership and let them deal with it .. its under warranty ... and when its not .. that math ability I have gave me another ability .. I can write checks that don't bounce ... and typically that is the best tool in my tool box. Thanks again.
 
Reply
Old Oct 26, 2009 | 06:01 PM
  #5  
cpiad's Avatar
cpiad
Thread Starter
|
Account Closed
Joined: Oct 2009
Posts: 682
Likes: 1
From: In the World
Default

Originally Posted by NightsterAl
I'm guessing your throttle assembly is like my 07 sporty's.
under your throttle side controls you should see your cables going into the control assembly. On those cables there are two rubber covers. The front one is the idle cable and the other is your throttle cable (if I remember correctly).
Pull those covers down and you should see adjustment screws. I would try tightening your throttle side up (which should be the cable closer to the rear of the motorcycle).
Thanks much ... I want to take a ride to Punta Gorda tomorrow .. and the dealership (Black-Widow) is on the way in Port Charlotte, Fl ... I'll stop by and see if a tech can take a few minutes and look at it for me ..if not .. I'll give it a shot on Thursday ... I'll probably make it worse ... thanks for being so kind and sharing your knowledge with a lesser mortal.
 
Reply
Old Oct 26, 2009 | 06:10 PM
  #6  
Cpitch's Avatar
Cpitch
Road Master
Joined: Jul 2009
Posts: 1,050
Likes: 1
From: MCALLEN ,TX
Default

mine does that too.
 
Reply
Old Oct 26, 2009 | 06:14 PM
  #7  
cHarley's Avatar
cHarley
Club Member
Joined: Feb 2007
Posts: 16,320
Likes: 306
From: Boynton Beach, FloriDuh
Default

Originally Posted by cpiad
Thanks ... I'm not being a ***** either.. or a lazy *** ...so, first, thanks for offering your help. Now my sermon ... Some of us are not mechanically inclined ... and some of us are ...and some of us are good at other things .. in my case its math ... I can map fuel curves like no body's business and work non linear energy transfer functions that most people could never begin to understand how to unravel .. but I don't have a clue as to what a "pull open cable" is and I sure as hell don't know what an "idle cable" is ... I have manuals for my Mercedes and the Miata and 60% of the time its confounding as hell to me. I do the best I can ... with what I have .. I'm 56 years old ... and I am now forgetting more things I used to know than I could ever replace with new knowledge and talents ...
OK Sorry, I'm 58 years old and mechanically inclined. If you aren't mechanically inclined, and "don't have a clue", then maybe it's best you take the bike to a dealer. If you are not able to read and follow a Service Manual, then it's probably best left to a professional.

If you're not mechanically inclined, leave it to someone that is.


 

Last edited by cHarley; Oct 26, 2009 at 06:18 PM.
Reply
Old Oct 27, 2009 | 07:39 AM
  #8  
NightsterAl's Avatar
NightsterAl
Cruiser
Joined: Oct 2008
Posts: 146
Likes: 0
From: St. Louis, MO
Default

I say feel free to ask questions. I've learned a lot from this site from questions people have asked on this forum. I'm a software engineer but still love wrenching on my own bike. If I can keep from taking it to the dealer and dropping down huge coin for them to do something simple, even better.
Keep the questions coming man.
 
Reply
HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders

story-0

Jason Momoa Is Turning Classic Harleys Into PHEVs

 Verdad Gallardo
story-1

Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

 Verdad Gallardo
story-2

6 Weirdest Harley-Davidsons Ever Sold to the Public

 Verdad Gallardo
story-3

7 Times Harley-Davidson Chucked Tradition Out the Window

 Verdad Gallardo
story-4

7 Surprising Harley-Davidson Products that Are Not Motorcycles

 Verdad Gallardo
story-5

8 Best Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-6

10 Worst Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-7

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

 Verdad Gallardo
story-8

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

 Verdad Gallardo
story-9

Harley-Davidson Reveals Super Cool Cafe Racer Concept

 Verdad Gallardo
Old Oct 27, 2009 | 09:55 AM
  #9  
mowdoc's Avatar
mowdoc
Cruiser
15 Year Member
Liked
Loved
Joined: Mar 2009
Posts: 153
Likes: 5
From: Bullhead City AZ
Default

Hey cpiad, you just keep asking questions man. The only stupid question is the one not asked OK?? That goes for everybody.

I'm sure cHarley wasn't trying to chop you off at the knees but he is mechanicly inclined, as I am, and your question would be basic stuff to us. I just hope we don't need any fuel curve advice now cause you'll have a field day with our a$$es!!!

My only input/advice to your question is this:
The throttle and related hardware is a very critical system on any motorcycle. If one is not absolutely positive sure what he/she is doing than the smart bet is to seek qualified help (dealer). Your issue with excess play in the cables would be a quick fix in the right hands so go with your plan to stop by a good dealership and let them handle it for you.

Have a SAFE ride and enjoy!!
mowdoc
 
Reply
Old Oct 27, 2009 | 10:10 AM
  #10  
Gpsjr10's Avatar
Gpsjr10
Outstanding HDF Member
Joined: Jun 2007
Posts: 2,541
Likes: 11
From: Elyria, OH
Default

I work at an auto parts store and once I had a surgeon come in and tell me he needs me to check his oil cause he doesn't know how to tell when it's full. Some people only know what they do for a living and that is all they know..
 
Reply



All times are GMT -5. The time now is 04:10 AM.

story-0
Jason Momoa Is Turning Classic Harleys Into PHEVs

Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.

By Verdad Gallardo | 2026-06-10 17:18:58


VIEW MORE
story-1
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.

By Verdad Gallardo | 2026-06-03 18:28:05


VIEW MORE
story-2
6 Weirdest Harley-Davidsons Ever Sold to the Public

Slideshow: From military-inspired singles to scooters and three-wheel utility vehicles, these Harleys took the company far outside its comfort zone.

By Verdad Gallardo | 2026-06-02 18:34:10


VIEW MORE
story-3
7 Times Harley-Davidson Chucked Tradition Out the Window

Slideshow: Harley-Davidson built its reputation on nostalgia, but every so often, the company took a hard left turn into the future.

By Verdad Gallardo | 2026-05-20 11:18:19


VIEW MORE
story-4
7 Surprising Harley-Davidson Products that Are Not Motorcycles

Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.

By Verdad Gallardo | 2026-04-29 16:50:35


VIEW MORE
story-5
8 Best Harley-Davidson Motorcycles Ever

Slideshow: Not every Harley gets it right, but these are the ones that genuinely earned their reputation.

By Pouria Savadkouei | 2026-04-15 14:23:21


VIEW MORE
story-6
10 Worst Harley-Davidson Motorcycles Ever

Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.

By Pouria Savadkouei | 2026-04-01 20:01:09


VIEW MORE
story-7
Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Slideshow: Killer Custom's "Jail Breaker" build focuses more on stance and visual aggression than mechanical overhaul.

By Verdad Gallardo | 2026-03-18 19:20:32


VIEW MORE
story-8
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.

By Verdad Gallardo | 2026-03-07 16:15:30


VIEW MORE
story-9
Harley-Davidson Reveals Super Cool Cafe Racer Concept

Slideshow: Harley-Davidson's new RMCR concept revives the café racer formula with modern hardware-and it may be exactly the reset the company needs.

By Verdad Gallardo | 2026-03-04 12:23:37


VIEW MORE