Nightster to Bobster (Cut, Chop, Whack, Paint, Done.)
Stage II
Joined: Oct 2009
Posts: 2
Likes: 0
rear taillights
hey i was wondering if you could explain on how to did the rear taillights, im thinking about chopping them fender mounts myself but im kinda scared haha. you did a great job cleaning that all up and making it look amazing! if you got a close up pic on that, that would be sweet too. thanks!
Thread Starter
|
Cruiser
Joined: Sep 2008
Posts: 177
Likes: 1
Wow! what a post. I almost forgot about all that stuff that was done. sigh...good times, good times.
Actually this shoud help a bit. You might even be able to see the bikes kidneys somewhere in these pics. Album keeps increasing so you're going to have to keep scrolling through the pages.
Anyways some small spacers were used to mount the lights. You can find spacers in hardware store, a specialty hardware store. The place I go to in town is a bike builders gold mine. and as a matter of fact right across the street from this place is Las Vegas Titan custom cycles. something like that. I don't know if Lowes or Home Depot deals with a lot of welder/mechanic custom building parts.
http://s295.photobucket.com/albums/mm155/DCVegas/
Actually this shoud help a bit. You might even be able to see the bikes kidneys somewhere in these pics. Album keeps increasing so you're going to have to keep scrolling through the pages.
Anyways some small spacers were used to mount the lights. You can find spacers in hardware store, a specialty hardware store. The place I go to in town is a bike builders gold mine. and as a matter of fact right across the street from this place is Las Vegas Titan custom cycles. something like that. I don't know if Lowes or Home Depot deals with a lot of welder/mechanic custom building parts.
http://s295.photobucket.com/albums/mm155/DCVegas/
Cruiser
Joined: Sep 2009
Posts: 147
Likes: 7
Really like the drag bars but I must have forward controls. Mid is just too uncomfortable for me. Think the drag bars would be uncomfortable with forward controls? One of the best looking nightsters I have seen man good job.
Stage III
Joined: Mar 2013
Posts: 3
Likes: 0
From: winnipeg, canada
Any tips on marking the holes to be drilled in the heat shields? Did you use any kind of a stencil or just take your time and make sure they were all even? Any special drill or bits used?
I'm a new Nightster owner and this is my first post on here
Thanks!
I'm a new Nightster owner and this is my first post on here
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
dasanto2
Motorcycles For Sale
1
Jul 31, 2019 10:32 AM
