96ci to 113ci?

Reply Subscribe

Thread Tools

Search this Thread

Oct 23, 2009 | 11:03 AM

NWMT

Thread Starter

3rd Gear

Joined: Oct 2009

Posts: 7

Likes: 0

From: Columbia Falls, MT

96ci to 113ci?

Now that winter is upon us, I am looking into upgrading my '09 Fatbob 96 to a 113. I am mainly looking for the boost in power that i do not have with the stock set up. Is this a recommended upgrade? I would like to get as close to the 120hp mark as possible, though not sure if there is a more relible upgrade for durability and power than the 113 or if this is in fact what i should go with. I do alot of riding, over 14k this year alone.

Any ideas out there?
Thanks

Oct 23, 2009 | 11:09 AM

Hillsidecycle.com

Sponsor

Joined: Dec 2007

Posts: 12,084

Likes: 829

A 107" drop-on kit is a viable option(your OE cylinders bored), but IF you are set on going bigger, then a 117" is would also work VERY well, as the cost is about the same in labor/machining, etc.
Scott

Oct 23, 2009 | 02:44 PM

NWMT

Thread Starter

3rd Gear

Joined: Oct 2009

Posts: 7

Likes: 0

From: Columbia Falls, MT

Thanks Scott.

Is the 113 not a recommended upgrade? Is the 107" a less intrusive upgrade or still just as involved as going bigger?

Oct 23, 2009 | 03:48 PM

qtrracer

Ultimate HDF Member

Joined: Jan 2008

Posts: 6,532

Likes: 132

From: SoCal

103/107 is just bigger pistons only, to go bigger than that the cases must be bored to accomodate the bigger cylinders that are needed to go with the pistons that make 113/117 with your 4 3/8 stroke crank in your bike now.

Oct 23, 2009 | 05:04 PM

ryanl

Tourer

Joined: Jul 2009

Posts: 384

Likes: 2

From: Eastern NC

Also have been some QC issues reported with the 113 cylinders being out of round. Plus you need to have your cases bored. A good 107 build will come out cheaper, while still reaching your performance goal.

Oct 24, 2009 | 09:27 AM

gunnert

Road Captain

Joined: Sep 2006

Posts: 749

Likes: 2

My .02, why settle for 113"? For the same cost you can go to 124" and easily get the power you are looking for. In my honest opinion (and I know others may disagree) if you can afford it, bigger is ALWAYS better.

Attached Thumbnails

Oct 24, 2009 | 09:55 AM

ryanl

Tourer

Joined: Jul 2009

Posts: 384

Likes: 2

From: Eastern NC

The SE 113 cylinders and pistons can be had for a few hundred dollars ( i passed on a set for $250) if you watch ebay/forums. The axtell units go for quite a bit more. But as stated, you may end up needing to rebore the SE units and get new pistons/rings. That will surely eat up the cost difference. Either way you get what you pay for. If bigger than 107 is desired, I like the 117/124 option.

Trending Topics

starter and brake relay fuses

29

446
Will Harley bring back the Ultra Limited with

21

659
Harley-Davidson Brings Revolution Max Production Back To U.S. In American...

19

703
I'm Back After Five Years

18

340
Traveling with a spare FOB

36

1.3k

Oct 24, 2009 | 11:38 AM

Hillsidecycle.com

Sponsor

Joined: Dec 2007

Posts: 12,084

Likes: 829

Quote:

Originally Posted by NWMT

Thanks Scott.

Is the 113 not a recommended upgrade? Is the 107" a less intrusive upgrade or still just as involved as going bigger?

NW,
As other folks have already mentioned, those cylinders are not round/straight from the Moco, as we have a set here now, to address.
The 107" does not require the spigot bores to be machined larger(not a problem to do whatsoever), but if looking forward to power delivery of what a larger engine can do, then a 117", or even a 124", will never leave you wondering if you did it wrong.