Woods Cams or SE ?
Thread Starter
|
Road Master
Joined: Jun 2008
Posts: 1,022
Likes: 11
From: Sweden
Woods Cams or SE ?
When I bought my 07 street bob I had Se Airfilter,V+H Big Radius 2-2 and a Power Commander fitted(Which has since been changedt to SERT)
Was Dyno'd with max BHP@75.15
Max torque@116.67
Have heard a lot of woods cams...I don't want to go big bore just maybe some head work with cams.
What woods cams or ScreamingEagle cams work with that set up and what type of increase in power can you expect relative to cost ???
Thanks ..
Was Dyno'd with max BHP@75.15
Max torque@116.67
Have heard a lot of woods cams...I don't want to go big bore just maybe some head work with cams.
What woods cams or ScreamingEagle cams work with that set up and what type of increase in power can you expect relative to cost ???
Thanks ..
Advanced
Joined: Jul 2007
Posts: 85
Likes: 0
From: The Appalachian foothills
I have the same question. Just had the SE airfilter and racetuner installed. Dyno numbers very similar, except your torque is higher. Thinking of the 204 or 211 SE cams before searching the forum and seeing the woods cam mentioned so favorably. Hmmm, decisions decisions.
Outstanding HDF Member
Joined: Sep 2008
Posts: 2,408
Likes: 1
From: pottsville,pa
I was thinking the same thing! Something doesn't seem right with the tq being that high. After looking at your dyno sheet closer, why does it say softail standard? And why doesn't it show any reference of pipes,sert or air intake? I had pretty much the same set-up as you...sehb,sert & br 2-2 pipes and only came up with 78hp/93tq. I would suggest the woods over the se cams. A lot of guys are seeing better #'s with aftermarket cams compared to similar se cams.
Last edited by red devil; Oct 22, 2009 at 09:13 AM.
Road Warrior
Joined: Sep 2005
Posts: 1,511
Likes: 1
From: Michigan
I was thinking the same thing! Something doesn't seem right with the tq being that high. After looking at your dyno sheet closer, why does it say softail standard? And why doesn't it show any reference of pipes,sert or air intake? I had pretty much the same set-up as you...sehb,sert & br 2-2 pipes and only came up with 78hp/93tq. I would suggest the woods over the se cams. A lot of guys are seeing better #'s with aftermarket cams compared to similar se cams.
Trending Topics
Road Warrior
Joined: Nov 2007
Posts: 1,589
Likes: 3
get it right out of the horses mouth. Call Bob Woods and get his opinion. Comparing the SE cams and Woods isn't fair. Woods/Andrews/S&S/R&R etc are more on the same playing field than SE.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Thread Starter
|
Road Master
Joined: Jun 2008
Posts: 1,022
Likes: 11
From: Sweden
On the Dyno sheet it says standard softail because that is what the comparion was,,the red line,mine was the blue and when I had that done it was with a power commander which has since been changed for a SERT..THE PC WAS NOT LETTING THE ENGINE RUN CLEAN ON DECELL..WAS POPPING AND BACKFIRING ,THEY GOT IT DOWN SO IT WAS'NT DOING IT SO MUCH BUT WAS STILL TOO MUCH,THE SERT CURED THE PROB : )
So the torque is 85 then..'cos here in Sweden they measured in Nm ??
So the torque is 85 then..'cos here in Sweden they measured in Nm ??