Wide Glide Rear Fender onto a Fat Bob
Thread Starter
|
Road Warrior
Joined: Jan 2007
Posts: 1,779
Likes: 223
From: Northern California
Wide Glide Rear Fender onto a Fat Bob
Hey everyone, I thought you you'd be interested on how to install a wide glide rear fender onto your Fat Bob and the part numbers needed.
First let me acknowledge our member "low n slow". Without his help we may have never known, thx MB
Here is the part numbers for everything you'd need for a bolt on application..
60519-10 Rear Fender, primed
59459-10 Left Fender Support, Black
59461-10 Right Fender Support, Black
60936-10 Inner Bracket x2
11896 Spacer x2
And if you'd like to change the chrome turn signals to black, here yea go..
68449-07 Rear Turn Signal, Black x2
69933-08 Short Stand-off. Black (from Fat Boy Low)
You'll also need a Run, Brake, Turn module (I'd recommend Badlands)
And a Side Mount License Plate Frame
Now, If someone here can just buy my Street Glide so that I can pick up a Fat Bob my winter project can start.
https://www.hdforums.com/forum/motor...eet-glide.html
First let me acknowledge our member "low n slow". Without his help we may have never known, thx MB
Here is the part numbers for everything you'd need for a bolt on application..
60519-10 Rear Fender, primed
59459-10 Left Fender Support, Black
59461-10 Right Fender Support, Black
60936-10 Inner Bracket x2
11896 Spacer x2
And if you'd like to change the chrome turn signals to black, here yea go..
68449-07 Rear Turn Signal, Black x2
69933-08 Short Stand-off. Black (from Fat Boy Low)
You'll also need a Run, Brake, Turn module (I'd recommend Badlands)
And a Side Mount License Plate Frame
Now, If someone here can just buy my Street Glide so that I can pick up a Fat Bob my winter project can start.
https://www.hdforums.com/forum/motor...eet-glide.html
Cruiser
Joined: Jan 2008
Posts: 198
Likes: 0
From:
Hey everyone, I thought you you'd be interested on how to install a wide glide rear fender onto your Fat Bob and the part numbers needed.
First let me acknowledge our member "low n slow". Without his help we may have never known, thx MB
Here is the part numbers for everything you'd need for a bolt on application..
60519-10 Rear Fender, primed
59459-10 Left Fender Support, Black
59461-10 Right Fender Support, Black
60936-10 Inner Bracket x2
11896 Spacer x2
And if you'd like to change the chrome turn signals to black, here yea go..
68449-07 Rear Turn Signal, Black x2
69933-08 Short Stand-off. Black (from Fat Boy Low)
You'll also need a Run, Brake, Turn module (I'd recommend Badlands)
And a Side Mount License Plate Frame
Now, If someone here can just buy my Street Glide so that I can pick up a Fat Bob my winter project can start.
https://www.hdforums.com/forum/motor...eet-glide.html
First let me acknowledge our member "low n slow". Without his help we may have never known, thx MB
Here is the part numbers for everything you'd need for a bolt on application..
60519-10 Rear Fender, primed
59459-10 Left Fender Support, Black
59461-10 Right Fender Support, Black
60936-10 Inner Bracket x2
11896 Spacer x2
And if you'd like to change the chrome turn signals to black, here yea go..
68449-07 Rear Turn Signal, Black x2
69933-08 Short Stand-off. Black (from Fat Boy Low)
You'll also need a Run, Brake, Turn module (I'd recommend Badlands)
And a Side Mount License Plate Frame
Now, If someone here can just buy my Street Glide so that I can pick up a Fat Bob my winter project can start.
https://www.hdforums.com/forum/motor...eet-glide.html
If you need any help let me know.
I see you caught the side and front wiring harness.
I did not ...
I had to go back and install those.
I used the existing rubber conduit and t-ed under the fender.
after I looked at one on the floor, I then saw and order those.
Stage II
Joined: Nov 2009
Posts: 2
Likes: 0
Very interested in this build
This is perfect. I have been researching the Fat Bob for a couple weeks. I plan on picking one up after my tour here in Afghanistan. The only reason I haven't placed the order is I am in love with the entire bike save for the rear fender. Today I was thinking that the Wide Glide had the rear end I liked but the Fat Bob had the front I liked. I wondered if it was even possible to combine the two.
Thanks to low n slow for taking the first plunge. This is definitley the way I want to go. I am wondering if I can handle the whole install myself. I don't have a lift though.
If it isn't too much trouble, could you post progress pics once it's on the lift? I'm curious about seat fitment with that fender. Also, do you have a rough price estimate on the total parts required for this mod?
Thanks to low n slow for taking the first plunge. This is definitley the way I want to go. I am wondering if I can handle the whole install myself. I don't have a lift though.
If it isn't too much trouble, could you post progress pics once it's on the lift? I'm curious about seat fitment with that fender. Also, do you have a rough price estimate on the total parts required for this mod?
Last edited by EL7; Nov 3, 2009 at 04:59 PM.
Cruiser
Joined: Jan 2008
Posts: 198
Likes: 0
From:
https://www.hdforums.com/forum/dyna-...ihed-pics.html
is the finished pics...you can do it all with out a lift...puttnutt listed all the parts needed.
I modified some of my existing parts so I would not have to by everything...I have a total cost of $205.00 not including paint. I did the paint in my fathers bodyshop.
is the finished pics...you can do it all with out a lift...puttnutt listed all the parts needed.
I modified some of my existing parts so I would not have to by everything...I have a total cost of $205.00 not including paint. I did the paint in my fathers bodyshop.
Stage II
Joined: Nov 2009
Posts: 2
Likes: 0
I found the finished pics after I had posted. The bike looks fantastic. Which parts did you skip by modifying? I'm hoping the mod will come under $500 with someone painting the fender black for me. Is this reasonable?
Trending Topics
1st Gear
Joined: Sep 2009
Posts: 5
Likes: 0
From: Rhode Island
the HD dealer here in RI tried to tell me today that it is impossible to mount the WG rear fender on my 09' fat bob. I need to print this thread out and bring low n slow's finished pics into shop tomorrow......
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
