When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
about 3500 miles on my '08 and have been noticing some slight shaking that seems to be from the rear brake.
no brake, no shake...
warped rotor? or what else might cause this? how do i tell? (pretty hard to watch the rear rotor while riding!!)
Do you do a lot of riding in the rain? The reason that I ask is because Ive hard.. not sure if its completely true.. but Ive heard that heating your rotors up while its raining causes your rotors to get hot then cold from the water.. and long term can cause warping..
bike has never been wet... except to get a bath - then it gets a leaf blower all over it and finally toweled down.
i take it for a short ride after its dried off and lightly use the brakes to make sure that they get dried.
and when i ride, i use engine braking as much as possible. makes no sense to me that the rotors would be warping already... but the symptoms sure seem to be that-
after a visual inspection, and walking the bike i can not see any rotor issues. i understand that maybe walking the bike is not enough to see the out of line, but if its out its very very slight. had another thought-
coupla nights ago after a ride, i pulled the bike in the garage and thinking i was in neutral let the clutch out - actually i was in first gear and this killed the engine. first time i have done this. cant imagine that our clutches cant handle this, but wondering if this could have caused the light shaking i am experiencing.
i guess i need to pull the rotors to check whether they are slightly warped?
is it possible that this could be some sorta clutch or other tranny issue?
--------
floating rotor for those interested (maybe me too!):
of course, mine is just outta warranty!! --- but then its prob not a warranty item anyway
dont think i want to tackle taking off the rear wheel myself-
what did it cost to replace yours? did you stay stock, or did you do an upgrade?
Popping the rear wheel off is easy.
Loosen up the necessary bolts, put the bike on a lift, clear the belt and remove the rear caliper, pop out the axle and the wheel lands on your toe.
If you don't have a lift, there are some creative ways to drop the wheel - like laying the bike down in the grass. Or using the centerstand that HD doesn't put on bikes.
Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.