TC88 Heads on a TC96

Reply Subscribe

Thread Tools

Search this Thread

Oct 4, 2009 | 07:36 AM

timberland

Thread Starter

Road Master

Joined: Oct 2007

Posts: 1,117

Likes: 4

From: Log home in SE Michigan full time. Log cabin in east TN, Smoky Mountians part time

TC88 Heads on a TC96

I have a set of TC88 heads from one of my previous builds from a 2002 FXDWG3, ported, 1.94/1.6 valves etc, etc. I would like to use these on my 08 Street Glide, FLHX. I know the TC88 front head is different in that it doesn't have the milled/ tapped hole for the upper front engine mount. Anyone ever machined this in a older style head? Anyone use different brackets? What are my options other than porting my TC96 heads. Thanks.

Oct 4, 2009 | 08:50 AM

prodrag1320

Banned

Joined: Sep 2009

Posts: 3,569

Likes: 624

From: deland,florida

heads

we`ve done the swap both ways,(earley on late,late on earley),putting the mounting hole isnt a big one,you will need to get a set of the earlier int. flanges
kirby
vee twin racing

Oct 4, 2009 | 09:33 AM

timberland

Thread Starter

Road Master

Joined: Oct 2007

Posts: 1,117

Likes: 4

From: Log home in SE Michigan full time. Log cabin in east TN, Smoky Mountians part time

kirby, I know about the intake flanges being different. I guess I will have to have my BIL set the head up in a CNC mill and face it off, drill and tap. Or sell these for $400 and invest another $400 and have my TC 96 heads ported and buy new springs, valves etc. It's never easy .

Oct 4, 2009 | 12:44 PM

Kingofcubes

Road Master

Joined: May 2007

Posts: 851

Likes: 5

From: Mitchellville, Ia.

02 heads would have to be welded first I believe they started putting the bolt bosses in them 06-07.

Oct 4, 2009 | 01:41 PM

SEDELUXE

Road Warrior

Joined: Dec 2007

Posts: 1,270

Likes: 0

go to the dealer and pick up a set of intake flanges and gaskets.
i might even have a set in the garage.
send ma your e-mail address and ill send them to you.

Oct 5, 2009 | 06:19 AM

jdscycle

Novice

Joined: Aug 2009

Posts: 21

Likes: 5

Call Dan Baisley, He could set the front head up for you

Oct 5, 2009 | 02:08 PM

DeweysHeads

Banned

Joined: Sep 2008

Posts: 113

Likes: 3

I drill and tap them, there have been photos on this forum posted, posters name is "Mopar" I think. They come out perfect. The earlier castings will need a spacer bushing made too as there are fins where the later casting have solid material.