First ride on the 103 build today.....
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,589
Likes: 3
First ride on the 103 build today.....
Hey everyone,
We finished our 103" build this afternoon. We used stock cylinders bored to 103", SE 103" pistons, Heads ported/cc'd by Big Boyz, andrews 54h cams. Man what a DIFFERENCE. I am amazed that I am riding the same bike. We worked late so I only got to take it for about a 20 mile ride but that sucker has some pep to it. I am very anxious to get it out on the road this weekend to do a breakin ride to where I can actually start running it up a little. Man what a difference the heads/pistons made. I had the cams installed for a couple trips before hand and I think I gained at least as much as I gained with the cams when we did the big bore setup. I'm hoping to get it setup to dyno sometime next week.
We finished our 103" build this afternoon. We used stock cylinders bored to 103", SE 103" pistons, Heads ported/cc'd by Big Boyz, andrews 54h cams. Man what a DIFFERENCE. I am amazed that I am riding the same bike. We worked late so I only got to take it for about a 20 mile ride but that sucker has some pep to it. I am very anxious to get it out on the road this weekend to do a breakin ride to where I can actually start running it up a little. Man what a difference the heads/pistons made. I had the cams installed for a couple trips before hand and I think I gained at least as much as I gained with the cams when we did the big bore setup. I'm hoping to get it setup to dyno sometime next week.
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,589
Likes: 3
hoping to ride 1k miles this weekend to get that done.
Road Master
Joined: Apr 2009
Posts: 915
Likes: 2
From: nw alabama
Trending Topics
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,589
Likes: 3
ohhhh we don't want to talk about that. LOL
Heads ported/cylinders bored $575
Pistons $200
Cams/gears $750 ish
misc parts adjust pushrods oil gaskets etc $300
Labor $600
You could save some money by not doing the gear drive cams but that's what I wanted.
Heads ported/cylinders bored $575
Pistons $200
Cams/gears $750 ish
misc parts adjust pushrods oil gaskets etc $300
Labor $600
You could save some money by not doing the gear drive cams but that's what I wanted.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,589
Likes: 3
I am trying to get some dyno time next week but it sounds like it may be a few weeks until we can work our schedules out to meet up. I'll post the numbers when we get done. You may want to consider the heads also. That made a big difference.