05 WG starting to run rough and miss...

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2009 | 07:04 PM

#11

seniorsuperglideE8

Supporter

Joined: Jan 2007

Posts: 15,788

Likes: 5,636

From: along the shore of Mishigami

The injector recall was for 06's injectors. Does the battery have a good charge on it? Is it getting a charge from the stator? Running some seafoam cleaner thru it is a good idea. Just to the side of the oil filter is the crank position sensor, follow the wire down to the plug and see if that plug is tight. Check the plug gap, .040".

Jul 2, 2009 | 01:46 PM

#12

hdFLH68

Thread Starter

Cruiser

Joined: Aug 2008

Posts: 135

Likes: 1

From: Colorado Springs

A little update:
I changed plugs and dumped some Seafoam in the tank. I have about 150 miles on it since and it seems to be a little better but for sure not 100% right.
I picked up some intake gaskets yesterday and was going to do that today when I noticed both of the breather hoses coming out of the breather are rotted and one was off the throttle body because it rotted and broke off.

Ya think this could be a culprit?

I see what's left of the hoses appear to be a formed hose. I'm just going to run to the parts store and get some flexible tube and go that route and see if it helps before I try replacing the intake gaskets

Jul 2, 2009 | 04:35 PM

#13

super05

Cruiser

Joined: Apr 2009

Posts: 180

Likes: 0

Quote:

Originally Posted by hdFLH68

No fuel management ...yet
Pulled the plugs last night. They look great.
2 different tanks of gas from different stations and always run premium.

I was thinking filter maybe. The Clymer manual I have sucks as far as any fuel injection info goes. Where might the filter be?

Mine started like that too. Only noticed it at low speeds

filter is part of the fuel pump - it's in the tank - i thought it was a 10K mile check item - not sure

Jul 2, 2009 | 11:46 PM

#14

Baeseman1

Elite HDF Member

Joined: Aug 2007

Posts: 4,265

Likes: 99

From: Northern VA

You make it to the parts store yet and give it a try???

Jul 3, 2009 | 06:27 AM

#15

rambobob

Tourer

Joined: Jun 2007

Posts: 344

Likes: 0

I just had two connectors going bad making bike run terrible. One was on rear injector. Symptons started out minor sputtering to major sputtering and engine light on within 3 days. 9,000 miles on bike.

Jul 3, 2009 | 11:31 AM

#16

hdFLH68

Thread Starter

Cruiser

Joined: Aug 2008

Posts: 135

Likes: 1

From: Colorado Springs

Went to the store last night, got the hose and replaced it. It was storming like mad so I didn't get to ride. I just woke up and it's already 93 outside. Not in a big rush to start sweating...

Sep 8, 2009 | 09:32 PM

#17

Baeseman1

Elite HDF Member

Joined: Aug 2007

Posts: 4,265

Likes: 99

From: Northern VA

Here's a thought. I was using the search function and I came up with a LOT of threads about the valve guide seals being bad on the 05' and early 06' models. If the intake seals are either bad or going - could that be the problem you're having???

Last edited by Baeseman1; Sep 8, 2009 at 10:29 PM.