Bike's fugged up. Hopefully something stupid
Thread Starter
|
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,580
Likes: 3,957
From: Vermont
Here's a shot of the problem. You can see the rear brake switch and the wiring that comes off it. Right behind my finger in the pic is where the only ziptie was holding it to the frame. The loop that was left on the other side of the ziptie was allowed to rub against the bolt that bolts the exhaust down through the tranny bracket!
Road Warrior
Joined: Jan 2006
Posts: 1,808
Likes: 0
From: Waynesville, NC
I found it, I found it, I found it! The bolt that secures my exhaust to the tranny bracket sticks down pretty far. Well right under that they had the wiring to the rear brake switch looped and ziptied to the frame, but the loop is sticking up......rubbing right against that bolt that sticks down pretty far! The damn wiring is rubbed right through!
Outstanding HDF Member
Joined: Feb 2008
Posts: 2,415
Likes: 8
From: virginia
Here's a shot of the problem. You can see the rear brake switch and the wiring that comes off it. Right behind my finger in the pic is where the only ziptie was holding it to the frame. The loop that was left on the other side of the ziptie was allowed to rub against the bolt that bolts the exhaust down through the tranny bracket!
Thread
Thread Starter
Forum
Replies
Last Post
ChopSticks
Sportster Models
38
Jun 10, 2015 07:27 PM
Cotton Hill
Ignition/Tuner/ECM/Fuel Injection
4
Oct 29, 2011 07:30 PM
