Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

2nd failure of my inner primary bearing

Thread Tools
 
Search this Thread
 
Old Mar 12, 2009 | 09:33 AM
  #21  
Wonkaboy's Avatar
Wonkaboy
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Default

Originally Posted by xxxflhrci
I guess you have a copy of the first letter that said that bearing needed to be replaced on the MoCo's dime every 15k and then the later copy they sent out that rescinded that service. Basically, the MoCo did their research and development on the consumer's dime. That crappy part should be covered for the life of the bike.
I got the second letter stating my bike did not need it either , well 2 months down the road IT DID NEED IT , dealer fixed for free....
 
Reply
Old Mar 12, 2009 | 09:34 AM
  #22  
rayfinseats's Avatar
rayfinseats
Road Captain
Joined: Mar 2008
Posts: 646
Likes: 0
From:
Default

10,000 miles and no such problem.
 
Reply
Old Mar 12, 2009 | 01:51 PM
  #23  
jimw411's Avatar
jimw411
Thread Starter
|
Tourer
Joined: Mar 2006
Posts: 449
Likes: 1
From: Ventura, CA (So Cal)
Default

Mud asked about the allignment dowels, i plan on asking the dealer to see the new parts and the old parts to see the difference and what has changed.

They are putting the '07 and up cases on my trans to fix the problem so i assume the '07 and up bikes dont have this problem. I'll let you guys know if my primary bearing fails again or if i have the same problems with my wifes '07 super glide.

Something i haven't checked into yet. My friend has a '08 super glide thats got around 14,000 miles and he told me it's making noises in the primary but i haven't heard his bike since he talked about it. But his bike is wayyyy over due for an oil change like probably 7,000 since the last service, and he bought it and after looking it over it was laid down in the primary side. Which not only did the tank with no badges and the newer outter primary give that away, but, new clutch lever and a little scrape on the fork tube is a sure sign. He paid for that bike what a new one would have cost, but his credit sucks, so he was lucky to get anything at all.
 
Reply
Old Apr 15, 2009 | 09:52 PM
  #24  
Topspin's Avatar
Topspin
Road Warrior
Joined: Oct 2007
Posts: 1,643
Likes: 3
From: Palm Beach
Default

Originally Posted by AdrianVall
Soo, what sound does it make when the bearing is going out?
Adrian... I noticed that you keep asking this question...

Cmon over and listen to mine. It is a whirling noise when the bike is idling in neutral.

They replaced my IPB Saturday and I still have the noise. This coming Saturday thay are replacing ALL the bearings including the one(s) in the tranny.
My bike has 10K on it. It has had 5 fluid changes too! 1, 2.5K, 5, 7.5K and 10K.

Im sooooo pissed.

email me: topspin43@aol.com
 

Last edited by Topspin; Apr 15, 2009 at 09:54 PM.
Reply
Old Apr 15, 2009 | 10:03 PM
  #25  
doxbike's Avatar
doxbike
Tourer
Joined: Nov 2007
Posts: 428
Likes: 87
From: SoCal
Default

Originally Posted by archergodwin
I believe '07 up are okay. Redesigned cases ..etc.
Sorry to rain on everybody's parade, but mine went at 1250 miles on an '09. Race and bearing were bad. Started with an increased vibration at 2100-2300 rpm's. Noise that went away when the clutch was pulled in.
 
Reply
Old Apr 16, 2009 | 07:37 AM
  #26  
AdrianVall's Avatar
AdrianVall
Elite HDF Member
Joined: Oct 2007
Posts: 4,968
Likes: 34
From: West Palm Beach, Florida
Default

Adrian... I noticed that you keep asking this question...

Cmon over and listen to mine. It is a whirling noise when the bike is idling in neutral.

They replaced my IPB Saturday and I still have the noise. This coming Saturday thay are replacing ALL the bearings including the one(s) in the tranny.
My bike has 10K on it. It has had 5 fluid changes too! 1, 2.5K, 5, 7.5K and 10K.

Im sooooo pissed.

email me: topspin43@aol.com
Ouch... well, its a damn good thing that the bike is still under warranty, right? lol. Yeah man, we should get together soon. I'm at work, and my web email is blocked. I'll shoot ya an email later tonight.
 
Reply
Old Apr 16, 2009 | 07:43 AM
  #27  
Rider57's Avatar
Rider57
Road Captain
Joined: Feb 2008
Posts: 571
Likes: 0
From: Colorado
Default

Originally Posted by jimw411
I have a 2006 Super Glide that was built FEB -2006, my inner Primary bearing failed at 14,500 miles and it was replaced for free about 3 weeks before my warranty was up. now a year later with 18,500 it's making noise again just like it did before. I spoke to the dealer which is 40 miles away and they said i will have to leave it there because the manufacturer requires them to do tests and check things over. I'm just worried i'm going to take it there and they will tear into it and not cover and try to charge me. I do have the knowledge and means to replace the bearing myself but don't feel i should have to pay for it, and i want the problem thats causing it to fail to be corrected. I think it's BS that i'll be looking forward to changing my primary bearing every oil change as long as i own the bike.
Anybody had it replaced a second time out of warranty???? and have the problem solved????
Tell then "No repairs without prior approval" and put it in writing on the shop ticket.
 
Reply
Old Apr 16, 2009 | 07:50 AM
  #28  
traveler's Avatar
traveler
Seasoned HDF Member
15 Year Member
Liked
Loved
Joined: Jun 2005
Posts: 12,946
Likes: 32
From: Colorado Springs, CO
Default

Yeah, unfortunately, 2006 was a transitional year, and seem to be more prone to problems....

I feel for ya.

~Joe
 
Reply
HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders

story-0

Jason Momoa Is Turning Classic Harleys Into PHEVs

 Verdad Gallardo
story-1

Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

 Verdad Gallardo
story-2

6 Weirdest Harley-Davidsons Ever Sold to the Public

 Verdad Gallardo
story-3

7 Times Harley-Davidson Chucked Tradition Out the Window

 Verdad Gallardo
story-4

7 Surprising Harley-Davidson Products that Are Not Motorcycles

 Verdad Gallardo
story-5

8 Best Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-6

10 Worst Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-7

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

 Verdad Gallardo
story-8

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

 Verdad Gallardo
story-9

Harley-Davidson Reveals Super Cool Cafe Racer Concept

 Verdad Gallardo
Old Apr 16, 2009 | 08:39 AM
  #29  
kk6pg's Avatar
kk6pg
Outstanding HDF Member
Joined: Nov 2007
Posts: 2,289
Likes: 22
From: Beautiful Downtown Burbank
Default

The 2006's are a problem year, and for the most part, the Moco seems to have the problem straightened out with them by changing out the cases.

That doesnt mean the problem has gone away on the newer bikes. I had mine replaced at 26k on the 08. Also had the automatic tensioner torn to shreads. Couldnt get a straight answer out of the dealer if they were related, and forgot to ask if the tensioner had run up on the end of the cam.
 
Reply
Old Apr 16, 2009 | 09:27 AM
  #30  
dyna rider's Avatar
dyna rider
Club Member
Veteran: Army
Joined: Dec 2007
Posts: 4,192
Likes: 168
From: Knoxville, Tn
Default Ipb

I had a Torrington bearing put in mine when I replaced the inner primary with a new chrome one. That was about 3500 miles ago...so far so good.
 
Reply



All times are GMT -5. The time now is 10:58 AM.

story-0
Jason Momoa Is Turning Classic Harleys Into PHEVs

Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.

By Verdad Gallardo | 2026-06-10 17:18:58


VIEW MORE
story-1
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.

By Verdad Gallardo | 2026-06-03 18:28:05


VIEW MORE
story-2
6 Weirdest Harley-Davidsons Ever Sold to the Public

Slideshow: From military-inspired singles to scooters and three-wheel utility vehicles, these Harleys took the company far outside its comfort zone.

By Verdad Gallardo | 2026-06-02 18:34:10


VIEW MORE
story-3
7 Times Harley-Davidson Chucked Tradition Out the Window

Slideshow: Harley-Davidson built its reputation on nostalgia, but every so often, the company took a hard left turn into the future.

By Verdad Gallardo | 2026-05-20 11:18:19


VIEW MORE
story-4
7 Surprising Harley-Davidson Products that Are Not Motorcycles

Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.

By Verdad Gallardo | 2026-04-29 16:50:35


VIEW MORE
story-5
8 Best Harley-Davidson Motorcycles Ever

Slideshow: Not every Harley gets it right, but these are the ones that genuinely earned their reputation.

By Pouria Savadkouei | 2026-04-15 14:23:21


VIEW MORE
story-6
10 Worst Harley-Davidson Motorcycles Ever

Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.

By Pouria Savadkouei | 2026-04-01 20:01:09


VIEW MORE
story-7
Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Slideshow: Killer Custom's "Jail Breaker" build focuses more on stance and visual aggression than mechanical overhaul.

By Verdad Gallardo | 2026-03-18 19:20:32


VIEW MORE
story-8
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.

By Verdad Gallardo | 2026-03-07 16:15:30


VIEW MORE
story-9
Harley-Davidson Reveals Super Cool Cafe Racer Concept

Slideshow: Harley-Davidson's new RMCR concept revives the café racer formula with modern hardware-and it may be exactly the reset the company needs.

By Verdad Gallardo | 2026-03-04 12:23:37


VIEW MORE