ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
Thread Starter
|
Road Captain
Joined: Oct 2005
Posts: 631
Likes: 6
From: Indiana
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
ORIGINAL: billybobber
Calibration # 59: 2006 Shotgun / Shorty Dual Exhaust with O2 Sensors
Configuration: 1450 SE A/C & Mufflers
File Name: 141NX104-A0.MT6
Components:
• 25deg Injectors P/N 27709-06
• SE Air Cleaner and Breather Kit P/N 29440-99C
• SE II Slip-Fit Mufflers P/N 80448-03 or 80258-99A
Here is the text from the PDF file
Calibration # 59: 2006 Shotgun / Shorty Dual Exhaust with O2 Sensors
Configuration: 1450 SE A/C & Mufflers
File Name: 141NX104-A0.MT6
Components:
• 25deg Injectors P/N 27709-06
• SE Air Cleaner and Breather Kit P/N 29440-99C
• SE II Slip-Fit Mufflers P/N 80448-03 or 80258-99A
Here is the text from the PDF file
Road Master
Joined: Sep 2005
Posts: 858
Likes: 1
From: Upstate NY / San Clemente CA
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
SERT is definatly the way to go IMO. If you have the stage 1 d/l, and slip ons, and are waiting to afford the SERT like me....I highly sugest not using the SE A/C. Use the stock one until then. The DL is for high flow ac, and restrictive exhaust. Using the less restrictive exhaust but the stock choker AC will keep you in a tolerable AF range.
Cobra.....did you already get the new injectors? If so did you notice any differance????
Cobra.....did you already get the new injectors? If so did you notice any differance????
Thread Starter
|
Road Captain
Joined: Oct 2005
Posts: 631
Likes: 6
From: Indiana
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
ORIGINAL: grizzly
Cobra.....did you already get the new injectors? If so did you notice any differance????
Cobra.....did you already get the new injectors? If so did you notice any differance????
They had to order the injectors and at this point I'm still waiting on them. They don't expect them until the end of this week or beginning of the next and they're just keeping my bike there until it's finished. So no, I don't have them yet but will within the next 1-2 weeks at most I would hope.
I'm not even sure I'll notice any difference once they're installed because I wasn't having any issues whatsoever beforehand. I'm just pumped up about getting this SERT and there already being a part for part match calibration that will work for me. After loading the calibration I can probably play from there with the mixture.
6th Gear
Joined: Mar 2006
Posts: 10
Likes: 0
From:
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
I have an '06 street bob with the seII exhaust and stage I a/c. I just had my stage I download done on 4/1/06. The p/n on the invoice is: 34361-06/DT. The description is: 1450 ST1 DYNA 25 DEG Digital T. Has anyone had any experience with this download? It seems to run fine with an occasional pop on decel.
Big Kahuna HDF Member
Joined: Feb 2006
Posts: 23,881
Likes: 34
From: USA
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
PowerCobra: You make a good point! Thanks!!!
That is why everybody should get a SERT if they are doing exhaust/AC mods. Then they should get the bike tuned on a Dyno with a tech who is up to date on how to tune a closed loop system. Then all will be fine.
That is why everybody should get a SERT if they are doing exhaust/AC mods. Then they should get the bike tuned on a Dyno with a tech who is up to date on how to tune a closed loop system. Then all will be fine.
Thread Starter
|
Road Captain
Joined: Oct 2005
Posts: 631
Likes: 6
From: Indiana
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
By the way, to update my post I did not get the 25's nor will I. My 8's are more than fine and my SERT and datalogging proves it out. They are more than adequate to handle the power of the Stage 1.
Cruiser
Joined: Oct 2005
Posts: 205
Likes: 0
From: Melbourne , Australia
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
thanks for the update mate been following these posts with some interest
seems like the 8 degree injectors are doing all you want
guess i will have to keep saving for that sert
has this got rid of all if any issues you were having ?
seems like the 8 degree injectors are doing all you want
guess i will have to keep saving for that sert
has this got rid of all if any issues you were having ?
Thread Starter
|
Road Captain
Joined: Oct 2005
Posts: 631
Likes: 6
From: Indiana
RE: ECM Calibration Numbers and Reason Why 06 Stage 1's Are Lean
I was lucky to have no problems in the first place so it was doubtful that 25's would do anything for me unless the 8's were not capable of supporting a Stage 1 at full throttle 6186rpm and 103mph. Well today put that to rest as my 8's handled both of those conditions with ease.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
scorpion81
Ignition/Tuner/ECM/Fuel Injection
7
Sep 19, 2006 08:07 AM
