front end clunk HD bulletin M-1215
Seasoned HDF Member
Joined: Jun 2005
Posts: 12,946
Likes: 32
From: Colorado Springs, CO
RE: front end clunk HD bulletin M-1215
FWIW,
Just tightening the stem nut down is NOT a good idea. "fall away" is what is used to ensure that the bearings are not too tight. Over tightening the forks will wear the bearings out fast.
Just "torquing the $hit out it" or words to the effect you said Mick, PROVES that the mechanic doesn't know anything about motorcycles.[
]
If you must, find an independant mechanic, or buy a motorcycle lift from sears, some tools while your there and get a factory service manual, and start dong your own wrenching. That's what I did, and my 2nd bike, my bobber project is helping me learn how to do the stuff I have never done before.[&:]
Harley-Davidson is really starting to get a black eye over these quality control issues, and dumb$hit service folks, IMHO.[&o]
~Joe
Just tightening the stem nut down is NOT a good idea. "fall away" is what is used to ensure that the bearings are not too tight. Over tightening the forks will wear the bearings out fast.
Just "torquing the $hit out it" or words to the effect you said Mick, PROVES that the mechanic doesn't know anything about motorcycles.[
]If you must, find an independant mechanic, or buy a motorcycle lift from sears, some tools while your there and get a factory service manual, and start dong your own wrenching. That's what I did, and my 2nd bike, my bobber project is helping me learn how to do the stuff I have never done before.[&:]
Harley-Davidson is really starting to get a black eye over these quality control issues, and dumb$hit service folks, IMHO.[&o]
~Joe
Cruiser
Joined: Mar 2008
Posts: 209
Likes: 0
RE: front end clunk HD bulletin M-1215
I took my 2007 FXSTB to the dealer on Sunday and they said that my bike isnt covered by this Service Bulletin and asked if I want to order the part. \\; From what I can see it definitely says "2008 and earlier FX Softail model" which would mean that I should be covered? \\; Anyone else have an \\; 07 Train that was covered? \\; I think I will call another dealer. \\; The dealer that I went to did print me 2 other bulletins though. \\; One was the ECM reset that deals with the heat issue and the other was the battery cable move which I am pretty sure that they had done at my 1000 service.  \\;
Banned
Joined: Oct 2007
Posts: 1,494
Likes: 5
The washer is about double the thickness of the stock washer that you bend up to lock the nut. It is just a thicker washer that, I suppose, is to keep from crushing since you are torquing the nut to approximately double the original torque. Also, you don't bend the washer up after torquing. I used a drop of blue loctite on the nut.
CB
CB
instruction sheet for p/n 45740-07 steering head washer kit
I have added the instruction sheet for p/n 45740-07 "STEERING HEAD WASHER KIT" to the database.
This kit contains the new hardened washer p/n 45727-08 and is used at:
All 2006-2007 Dyna and 2008 and earlier FXDWG Models
All 2008 and earlier FX Softails (except FX Springer Models)
Torq specs are in the instruction sheet.
___________
FXD2003Rider
This kit contains the new hardened washer p/n 45727-08 and is used at:
All 2006-2007 Dyna and 2008 and earlier FXDWG Models
All 2008 and earlier FX Softails (except FX Springer Models)
Torq specs are in the instruction sheet.
___________
FXD2003Rider
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
M-1215 January 3, 2008
STEERING STEM NUT/WASHER
Purpose
This service bulletin is to inform dealers of updated parts and
service procedures to eliminate loss of clamp load on upper
steering stem nut. Normal warranty applies for service performed.
Motorcycles Affected
2006-2007 Dyna models
2008 and earlier FXDWG
2008 and earlier FX Softail models
2008 and earlier VRSC models
Required Dealer Action
If customer is experiencing any of the following conditions,
perform the service procedure for the appropriate model as
explained below.
Looseness in front end
Loss of clamp load on upper steering stem nut
Front end clunk
Dyna and FX Softail Models
See list of affected motorcycles above. If any of the affected
Dyna or FX Softail motorcycles are experiencing front end
looseness, order kit number 45727-07. See STEERING wrong part number, I will post new one when I get it (and it is not 45727-08) there is a bulliten for the bulletin I am told. the part # could be 45740-07 ck with your dealer
HEAD WASHER KIT INSTRUCTION SHEET (-J04469) to
install the kit.
VRSC Models with Aluminum Stem
2007 and earlier VRSC models were shipped from the factory
with aluminum stems. If the lower triple tree was subsequently
replaced on these vehicles, check the service
records to determine if the new lower triple tree included any
of the following steel stems.
46771-02A
46860-06A
46752-01A
46788-06A
46781-06A
NOTE
All 2008 VRSC models have a lower triple tree assembly with
a steel stem.
For VRSC model motorcycles with an aluminum stem experiencing
looseness in the front end, order kit number 45736-
07. See STEERING STEM NUT KIT INSTRUCTION SHEET
(-J04468) to install the kit.
VRSC Models with Steel Stem
For 2008 VRSC models (and any earlier VRSC models with
a steel stem) with front end looseness, refer to the 2008
VRSC MODELS PARTS CATALOG for service parts, and see
2.34 STEERING HEAD in the 2008 VRSC MODELS SERVICE
MANUAL for service instructions.
VRSC models under normal warranty should utilize labor
code 2290 for 0.4 hour.