My "MOCO trained" Dyno tune results.
Thread Starter
|
Cruiser
Joined: Feb 2008
Posts: 109
Likes: 0
From: Indiana
My "MOCO trained" Dyno tune results.
Had my 07 WG dyno'd at the dealer the other day and I guess I got what I expected from them. They did tell me that they don't do "race" tuning but rather step tuning for ridability. All out maximum horsepower and torque at WOT isn't their goal so I'm guessing there's more peak power to be had from a stage 1 96tc if a race tuner went after it. From what I've read these numbers are in the ballpark for an average tune?
73.41 hp max @ 5300 rpm.
83.81 tq max @ 3900 rpm.
The motor sounds good and pulls hard so I'm not complaining. Haven't checked mileage yet but I would expect that this type of tuning is aimed at a compromise that should still give me around 40+ mpg on the road, we'll see how that turns out over the next few tanks.
My only complaint so far is that I have decell popping. I have my dyno tune file so I'll be working on it to try and eliminate the pop on decell. I talked to the tuner after the fact and he seems like a good guy and was willing to talk about my options for tuning out the popping. I could take it back in for that but I'd just as soon keep my bike and do it myself.
So, does the dyno plot look alright to you guys? Anyone want to take a look at my SERT file?
Al.
73.41 hp max @ 5300 rpm.
83.81 tq max @ 3900 rpm.
The motor sounds good and pulls hard so I'm not complaining. Haven't checked mileage yet but I would expect that this type of tuning is aimed at a compromise that should still give me around 40+ mpg on the road, we'll see how that turns out over the next few tanks.
My only complaint so far is that I have decell popping. I have my dyno tune file so I'll be working on it to try and eliminate the pop on decell. I talked to the tuner after the fact and he seems like a good guy and was willing to talk about my options for tuning out the popping. I could take it back in for that but I'd just as soon keep my bike and do it myself.
So, does the dyno plot look alright to you guys? Anyone want to take a look at my SERT file?
Al.
Road Master
Joined: Mar 2007
Posts: 1,177
Likes: 23
RE: My "MOCO trained" Dyno tune results.
Could someone in the know please explain the logic on the hidden tableAF_PE_Fuel_Air_Ratio tableon his setup? note: His tuner started with 176AE104-A1.MT6 that has the same issue.
Iwonder if his tuner was pulling his hair out on that one.
AW
Iwonder if his tuner was pulling his hair out on that one.
AW
Outstanding HDF Member
Joined: May 2007
Posts: 2,304
Likes: 31
From: Florida
RE: My "MOCO trained" Dyno tune results.
They're a tad low but in the ball park. For a WOT run the AFR looks very lean too.
TickTock
That is a funny thing and the best laugh is there was only 8 runs made in the run files.......amazing how people tune for the rideability doing 100% TP pulls!!!
TickTock
That is a funny thing and the best laugh is there was only 8 runs made in the run files.......amazing how people tune for the rideability doing 100% TP pulls!!!
Trending Topics
Thread Starter
|
Cruiser
Joined: Feb 2008
Posts: 109
Likes: 0
From: Indiana
RE: My "MOCO trained" Dyno tune results.
Thanks for the interest guys. I did notice that there seems to only have been 8 runs and I agree that the AFR looks lean at WOT. My tuning experience is limited and on my 93 Vette so this V-Twin is new to me but AFR for max power at WOT on thedyno w/ wideband in the Vette was closer to 12.5:1.
As I understand it the bike was only up on the dyno for 2 hours so I don't think I got a great dyno tune. Now I'm starting to wonder what I got.
Bike has Rush 2" baffle slip-on mufflers and a stage 1 style a/c kit. Other than that it is a stock 2007 96" tc running on 93 octane.
I have added ".txt" to the end of the tuning file name and included it here, hope this works.
Al.
edit to delete the tuning file as it was a lousy tune and I'd hate for someone to actually use it.
As I understand it the bike was only up on the dyno for 2 hours so I don't think I got a great dyno tune. Now I'm starting to wonder what I got.
Bike has Rush 2" baffle slip-on mufflers and a stage 1 style a/c kit. Other than that it is a stock 2007 96" tc running on 93 octane.
I have added ".txt" to the end of the tuning file name and included it here, hope this works.
Al.
edit to delete the tuning file as it was a lousy tune and I'd hate for someone to actually use it.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Outstanding HDF Member
Joined: May 2007
Posts: 2,304
Likes: 31
From: Florida
RE: My "MOCO trained" Dyno tune results.
You are correct Al...the AFR at WOT should be 12.5:1 to 12.8:1......when you see a tuner leaning out the AFR he is looking for HP although the TQ will fall. I'm going to look at your map, there is no way I can tell you if it is right for your build but I can and will tell you what hedid and what he didn't do.
Couldn't open it....please send it to me via my email hdmd88@yahoo.com I need it to come as a MT6 or MT5 file
Couldn't open it....please send it to me via my email hdmd88@yahoo.com I need it to come as a MT6 or MT5 file