When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not to up on the needs of sporties but I would say their sport trans oil myself. You run into a different scenario here with the shared oils in a sporty.
Wish Redline or Amsoil were a bit easier to get but Mobile-1 v-twin/mx4t/75-90g series has worked well for me for several years in Harley's and British twins.
Wonder why not many folks have been using the Bel Ray tranny fluid. I'm about to dump some into my tranny based on some pretty good feed back from several unbiased resources.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
ORIGINAL: Taildraggerdave
AND, the 0-ring was shredded and split, and the tech put a bunch of liquid pipe dope on the threads.
I just did my first service on my new Dyna and while working on it I remembered your post about the pipe dope on the drain plug. It looks like engine, trans and primary plugs on my bike all came from the factory with pipe dope on them. Obviously the tech should've replaced the bad o-ring, but maybe the pipe dope was already on there?
What the heck is the o-ring even for if they are going to slather it in pipe dope?!?!?! If the tech indeed added MORE dope without thoroughly cleaning the threads, then that plug may not even go in far enough for the o-ring to seat.
Anyway, just wanted to share my observation. I wonder if it is used as much as a thread locker as a sealer? I don't think there is anything wrong with using it, but you gotta clean that crap out each time and use a reasonable amount.
Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.