Riders w/Ape Hangers, BEWARE!
Tourer
Joined: Nov 2006
Posts: 464
Likes: 0
From:
RE: Riders w/Ape Hangers, BEWARE!
Holy Crap! Thats the bars I just put on my Fatboy. Hopefully since I don't get any wobble, it won't be a problem. Are you gonna re-install apes back on it? If so what brand ya gonna use? Good thing you checked man. That would not have been a pretty sight if they broke on ya goin down the road. Bubba
Road Warrior
Joined: Jul 2006
Posts: 1,302
Likes: 0
From: SW Corner of NW Corner
RE: Riders w/Ape Hangers, BEWARE!
my Wild 1's installation sheet was pretty clear that a one piece top clamp was needed.
I am just curious if you were using a one piece top riser clamp, or a two piece - in other words, on your risers, is there a top clamp for each riser or is it one solid piece.
I am just curious if you were using a one piece top riser clamp, or a two piece - in other words, on your risers, is there a top clamp for each riser or is it one solid piece.
Road Captain
Joined: Dec 2005
Posts: 536
Likes: 0
From: AUSTRALIA
RE: Riders w/Ape Hangers, BEWARE!
You need to replace the two piece handlebar clamps with a one piece, it will fit under your cover, this is what I have done.
ORIGINAL: Sincecrazy
I recently dissassembled the front of my bike (2001 Roadking) to inspect the steering head bearings and after removing the steering head cover I noticed that my bars have stress cracks from the center of the bars, between the handlebar clamps, where the control wires come out. The bars are Buffalo 1 1/4" 16" high with wires ran internally, and were installed in May of 02. My odometer is currently sitting at 70,000 and this is the first that Ive noticed that the bars are cracked. I think alot of stress is placed on the bars with the 'wobble' effect which Im hoping to remedy with a Ride Str8, or true track system. Periodically check your bars. A surprise of finding the cracks would be mild in comparision to the surprise of having them break and possibly shift independent of each side while riding.
I recently dissassembled the front of my bike (2001 Roadking) to inspect the steering head bearings and after removing the steering head cover I noticed that my bars have stress cracks from the center of the bars, between the handlebar clamps, where the control wires come out. The bars are Buffalo 1 1/4" 16" high with wires ran internally, and were installed in May of 02. My odometer is currently sitting at 70,000 and this is the first that Ive noticed that the bars are cracked. I think alot of stress is placed on the bars with the 'wobble' effect which Im hoping to remedy with a Ride Str8, or true track system. Periodically check your bars. A surprise of finding the cracks would be mild in comparision to the surprise of having them break and possibly shift independent of each side while riding.
RE: Riders w/Ape Hangers, BEWARE!
ORIGINAL: ROADTRAIN
You need to replace the two piece handlebar clamps with a one piece, it will fit under your cover, this is what I have done.
You need to replace the two piece handlebar clamps with a one piece, it will fit under your cover, this is what I have done.
Ultimate HDF Member
Joined: Sep 2005
Posts: 5,820
Likes: 15
From: PA
RE: Riders w/Ape Hangers, BEWARE!
Glad you didn't find out about this while riding. I just put on Chubby's over the winter and like the fact that they actually run 1" tubing inside the 1 1/4 inch bars for reinforcment. Maybe this is an advantage the Chubby's bars have over the competition. Check them out if you plan on replacing your apes.
Trending Topics
Thread Starter
|
Road Warrior
Joined: Dec 2004
Posts: 1,726
Likes: 12
RE: Riders w/Ape Hangers, BEWARE!
.......
Last edited by Sincecrazy; Jan 18, 2011 at 11:58 AM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Road Captain
Joined: Feb 2007
Posts: 666
Likes: 1
From: Cavendish, Pei
RE: Riders w/Ape Hangers, BEWARE!
These bars do this because they are drilled . Before drilling in any structural member always weld on another piece of steeel first( even a washer will do) then drill. I have seen motocross and street bike frames and bars thatcracked because they were drilled into and not re-enforced . On bars everytime you turn them at a standstill itputs a tremendous amount of pressure on the riser bolts and bars . Before you buy any bars check to see if they have been re-enforced or not, especialy Apes .When I did mine I welded on a 3/4 x1 inch 1/8th plate and then drilled through it to make a rectangular opening for my wires.You can'tsee it because it is underneath the bars and the speedo hides it .Better yet buy bars that have hollow riser bolts and run the wires there...Mark... ...
