Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

Using a lift on a sofetail

Thread Tools
 
Search this Thread
 
Old Mar 6, 2007 | 04:54 PM
  #1  
tatersalad's Avatar
tatersalad
Thread Starter
|
Cruiser
Joined: Jan 2007
Posts: 203
Likes: 1
From:
Default Using a lift on a sofetail

Anyone have any difficulties using a lift when raising your sofetail? Seems MoCO sells a device to cover the lift arms to protect the softails under belly.
 
Reply
Old Mar 6, 2007 | 05:00 PM
  #2  
hdpearson13's Avatar
hdpearson13
Road Warrior
Joined: Dec 2006
Posts: 1,883
Likes: 17
From: Williamsport, Pa
Default RE: Using a lift on a sofetail

just put mine back up for storage i just slide it cross bar and tie the front down for balance
 
Reply
Old Mar 6, 2007 | 05:00 PM
  #3  
OneBlackFly's Avatar
OneBlackFly
Club Member
Joined: Jan 2006
Posts: 1,360
Likes: 3
From: Idaho Falls
Default RE: Using a lift on a sofetail

Yes, get the frame protectors. They are orange semi-hard plastic and cushion the frame to allow the shocks to clear the lift. About $15 and well worth it. See this link: http://www.harley-davidson.com/gma/g...bmLocale=en_US
 
Reply
Old Mar 6, 2007 | 05:01 PM
  #4  
anubisss's Avatar
anubisss
Banned
Joined: Jan 2006
Posts: 17,265
Likes: 21
From: Los Angeles, CA
Default RE: Using a lift on a sofetail

Never needed anything but my lift. Here is how I do it. I slide the lift under from the rght side (the side you fill the oil on). If it hits a point where it will not roll under the bike any further I grab the right handgrip AND THE BRAKE. I pull the bike off the jiffy stand but make sure to leave the stand down. Very Important to leave the stand down. While the bike is balanced off the stand I slide the rest of the jack under the bike and then start pumping it up with my foot. Works great for me. I can do it with one person every time. I have also found that if I let the jack compress completely when lowering the bike I usually don't need to pull the bike off the jiffy to get the jack underneath it. I have the harbor freight yellow jack. t is quite simple once you get used to it.
 
Reply
Old Mar 6, 2007 | 05:25 PM
  #5  
Kong's Avatar
Kong
Advanced
Joined: Dec 2006
Posts: 97
Likes: 2
From:
Default RE: Using a lift on a sofetail

I generally keep my bike up on the lift. I had one bikestolen out of the garage once and anything I can do to slow them down by even a second or maybe make just a little bit of noise while they try to make off with it is a good thing in my opnion.

My lift is the heavy red steelone from Sears not the yellow aluminum one. I usually rollthe liftunder the bike as far forward as possible with the jiffy stand down, then while sitting on the bike and holding it upright I simply roll the bike forward until the frame and the lift's arms contact and then I hit the foot pedal. My bike is a Deuce and its lowered in the rear - 1.75" at the moment. I don't have any problems at all with the lift fitting under the bike and the lift comes standard with protectors on the arms. Forwhatever its worth the bike balances best when the lift's forward arm is about an inch behind the jiffy stand. With it in that position and the front end strapped down to the lift it is rock solid.
 
Reply
Old Mar 6, 2007 | 05:51 PM
  #6  
20NightTrain03's Avatar
20NightTrain03
Road Master
15 Year Member
Joined: Mar 2006
Posts: 1,076
Likes: 3
From: Brick NJ
Default RE: Using a lift on a sofetail

ORIGINAL: anubisss

Never needed anything but my lift. Here is how I do it. I slide the lift under from the rght side (the side you fill the oil on). If it hits a point where it will not roll under the bike any further I grab the right handgrip AND THE BRAKE. I pull the bike off the jiffy stand but make sure to leave the stand down. Very Important to leave the stand down. While the bike is balanced off the stand I slide the rest of the jack under the bike and then start pumping it up with my foot. Works great for me. I can do it with one person every time. I have also found that if I let the jack compress completely when lowering the bike I usually don't need to pull the bike off the jiffy to get the jack underneath it. I have the harbor freight yellow jack. t is quite simple once you get used to it.


i also have the same lift and use the exact procedure you described.........

except since my bike is lowered so far down in the rear i roll it up on some wood to get the clearnace i need
 
Reply
Old Mar 6, 2007 | 05:52 PM
  #7  
SCJE8's Avatar
SCJE8
Club Member
15 Year Member
Liked
Joined: Nov 2006
Posts: 1,531
Likes: 4
From: Pensacola, Florida
Riders Club Member
Default RE: Using a lift on a sofetail

I have the Sears Craftsman aluminum jack...very nice, very smooth. Depending on what maintenance task I'm doing (need the front end up...need the back end up) determines where I locate the jack under the beast for balancing purposes.

anubisss is right...keep your jiffy stand down at all times! When you are lowering your bike back to the ground and the motorcycle finally lands on both tires it is very easy to have it off-center and the possibility ofthe bikefalling over. That's why it's important to have a good jack with a smooth action. My buddy has an old no-name jack that leaks fluid all over the place and makes my heart skip a beat everytime he's lowering hisscooter...the jack just seems to drop an inch or so at a time! Too damn nerve racking for me! Anyway...don't be a statistic when doing something as simple as jacking your bike up or down!

Good luck!

Steve
 
Reply
Old Mar 6, 2007 | 05:59 PM
  #8  
mcpastor's Avatar
mcpastor
Tourer
15 Year Member
Joined: Oct 2005
Posts: 442
Likes: 3
From: Warren, Ohio
Default RE: Using a lift on a sofetail

ORIGINAL: OneBlackFly

Yes, get the frame protectors. They are orange semi-hard plastic and cushion the frame to allow the shocks to clear the lift. About $15 and well worth it. See this link: www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=84552444184791 5&FOLDER%3C%3Efolder_id=2534374302289555&A SSORTMENT%3C%3East_id=2534374302289555&bmUID=1 173211320480&bmLocale=en_US
Thanks for the tip. I use a yellow sears aluminum jack. No problem getting it under the bike at all. I am always careful, however, to visually line up the jack pads so they don't contact the shocks. This makes the bike back-heavy on the jack. One option is to tie it down. I've never done this. Another is to just be very careful. This I do. The bike gets really squirrelly though when I clean the back wheel.I'm gonnagit me sum o' dem frame protectors.

I spoke witha friend who never gave his shocks a second thought. He just shoveshis jack under the bike where it balances best and raises it up. I had previously ridden his Softail and the suspension felt very lethargic to me. Hmmm.

And yes... Keep the jiffy stand down...and be careful the bike doesn't start leaning to the opposite side when lowering! I had a very close call and had to use a football block to get it over onto its stand. That's one reason I've found it best to insert the jack on the right side ofmy bike.
 
Reply
HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders

story-0

Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

 Verdad Gallardo
story-1

6 Weirdest Harley-Davidsons Ever Sold to the Public

 Verdad Gallardo
story-2

7 Times Harley-Davidson Chucked Tradition Out the Window

 Verdad Gallardo
story-3

7 Surprising Harley-Davidson Products that Are Not Motorcycles

 Verdad Gallardo
story-4

8 Best Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-5

10 Worst Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-6

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

 Verdad Gallardo
story-7

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

 Verdad Gallardo
story-8

Harley-Davidson Reveals Super Cool Cafe Racer Concept

 Verdad Gallardo
story-9

Engraved Rebellion: Inside Bundnerbike's Glam Rock II

 Verdad Gallardo
Old Mar 6, 2007 | 06:22 PM
  #9  
Brettsterhog's Avatar
Brettsterhog
Advanced
Joined: Apr 2006
Posts: 72
Likes: 0
From:
Default RE: Using a lift on a sofetail

I have the yellow aluminum jack from Sears as well that I use on my Springer. Have never noticed it lifting up on the shocks- maybe I need to pay more attention, but I think I position it far enough forwad it only hits the frame. Anyway, I position it from the left side of the bike- have never tried the right side- might be better. Everytime I lift it just so the tires are off the ground, then give it a little shake to make sure it's stable. Haven't had any trouble so far. It seems like it would take a lot of shaking to knock it off balance. Thats how I do it anyway.
 
Reply
Old Mar 6, 2007 | 06:41 PM
  #10  
OneBlackFly's Avatar
OneBlackFly
Club Member
Joined: Jan 2006
Posts: 1,360
Likes: 3
From: Idaho Falls
Default RE: Using a lift on a sofetail

The shocks are lower than the frame tubes, so no matter which jack is used, the frame protectors lift the bike on the frame tubes, not the shocks.
 
Reply



All times are GMT -5. The time now is 07:45 AM.

story-0
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom

Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.

By Verdad Gallardo | 2026-06-03 18:28:05


VIEW MORE
story-1
6 Weirdest Harley-Davidsons Ever Sold to the Public

Slideshow: From military-inspired singles to scooters and three-wheel utility vehicles, these Harleys took the company far outside its comfort zone.

By Verdad Gallardo | 2026-06-02 18:34:10


VIEW MORE
story-2
7 Times Harley-Davidson Chucked Tradition Out the Window

Slideshow: Harley-Davidson built its reputation on nostalgia, but every so often, the company took a hard left turn into the future.

By Verdad Gallardo | 2026-05-20 11:18:19


VIEW MORE
story-3
7 Surprising Harley-Davidson Products that Are Not Motorcycles

Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.

By Verdad Gallardo | 2026-04-29 16:50:35


VIEW MORE
story-4
8 Best Harley-Davidson Motorcycles Ever

Slideshow: Not every Harley gets it right, but these are the ones that genuinely earned their reputation.

By Pouria Savadkouei | 2026-04-15 14:23:21


VIEW MORE
story-5
10 Worst Harley-Davidson Motorcycles Ever

Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.

By Pouria Savadkouei | 2026-04-01 20:01:09


VIEW MORE
story-6
Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Slideshow: Killer Custom's "Jail Breaker" build focuses more on stance and visual aggression than mechanical overhaul.

By Verdad Gallardo | 2026-03-18 19:20:32


VIEW MORE
story-7
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.

By Verdad Gallardo | 2026-03-07 16:15:30


VIEW MORE
story-8
Harley-Davidson Reveals Super Cool Cafe Racer Concept

Slideshow: Harley-Davidson's new RMCR concept revives the café racer formula with modern hardware-and it may be exactly the reset the company needs.

By Verdad Gallardo | 2026-03-04 12:23:37


VIEW MORE
story-9
Engraved Rebellion: Inside Bundnerbike's Glam Rock II

Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.

By Verdad Gallardo | 2026-02-24 18:19:44


VIEW MORE