Recall on 07 Harley-Davidsons

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2006 | 12:22 PM

#61

Dsanchez

Road Captain

Joined: Feb 2006

Posts: 723

Likes: 1

From: My Mom

RE: Recall on 07 Harley-Davidsons

To answer the question about my setup...

07 FLHTC, PCIII usb, SEAC, and a set of '04 roadking pipes with holes in the baffles for now...workin on the budget for slip-ons.
I'm runnin the 812-007 map that I tweaked the timing table and retarded it by 2 degrees in the 40, 60, and 80 throttle postion at 2500-6000 rpms. I did this to address the ping I had when I REALLY rolled on it.

Dec 13, 2006 | 09:32 PM

#62

Hogaholic

Outstanding HDF Member

Joined: Aug 2006

Posts: 2,613

Likes: 0

From: Virginia

RE: Recall on 07 Harley-Davidsons

Quote:

ORIGINAL: toadmanor

I am not the brighhtest bul, but (OK no comments)...

Seems to me the PC takes the outputs from the ECM and then changes them when sending to the fuel module. The SERT reprograms the ECM.

If the above is true, what difference does it make to have the download done of you are using the PC. I had mine done because I will not repipe and AC until the spring. I do think it runs smoother. Not sure what it does to the mileage.

Toad

Because it seems mainly this is timeing mod. The pc111 doesnt change timeing except at 100 percent throttle.

Dec 14, 2006 | 12:02 AM

#63

Shovelhead Bob

Outstanding HDF Member

Joined: Apr 2006

Posts: 2,537

Likes: 21

RE: Recall on 07 Harley-Davidsons

Quote:

ORIGINAL: Hogaholic

Because it seems mainly this is timeing mod. The pc111 doesnt change timeing except at 100 percent throttle.

Huh???????????????

A PC can be programmed to modify timing at any point, from 0 to 100% throttle......

You can add or delete up to 11 degrees.....

In the basic tuning mode alone you can alter 117 points of timing......

Go to Advanced mode and it QUADRUPLES....... to 450 points of timing (Front and Rear Cylinders)....

Dec 14, 2006 | 08:39 PM

#64

Dsanchez

Road Captain

Joined: Feb 2006

Posts: 723

Likes: 1

From: My Mom

RE: Recall on 07 Harley-Davidsons

YEAH !!! Like BOB said...

and as I said...

I changed my timing with MY PCIII usb at the 40,60, 80 position....no doubt about it !

Dec 14, 2006 | 08:49 PM

#65

pittguy

Outstanding HDF Member

Joined: Jul 2006

Posts: 2,303

Likes: 4

From:

RE: Recall on 07 Harley-Davidsons

All HOG is saying is that the canned PC111 maps,at least the ones Ive seen,come w/no timing changes until the 100% setting.You can change the cells at diiferent throttle/rpm ranges from the canned zero setting.

Dec 14, 2006 | 08:57 PM

#66

akflyer

Advanced

Joined: Jul 2006

Posts: 65

Likes: 0

RE: Recall on 07 Harley-Davidsons

My map from Fuel Moto did not include any timing changes. I spoke with them and Jamie suggested that I go ahead and do the torque smoothing download. According to him the flash is just timing, and it does not require that the PCIII be disconnected to do the flash, or remapped afterward. I am taking it to the dealer on Saturday.

Dec 14, 2006 | 08:58 PM

#67

Dsanchez

Road Captain

Joined: Feb 2006

Posts: 723

Likes: 1

From: My Mom

RE: Recall on 07 Harley-Davidsons

That's accurate. Mine showed the timing advanced to 4 in the 100 position on the "canned" map.

Dec 14, 2006 | 11:15 PM

#68

Shovelhead Bob

Outstanding HDF Member

Joined: Apr 2006

Posts: 2,537

Likes: 21

RE: Recall on 07 Harley-Davidsons

You need to look at the maps that are available online......

Most are mod' at the 40-60% percent.....

Hell, stock Softy is showing NEGATIVE Numbers....

These are maps from Dynojet, in the PC Library......